* UL certification NOT available for the 230V model
The newcorrosion resistantAi SuperVac 21 cfm commercial grade vacuum pumps are now UL/CSA certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan.These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.
Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.
It is important to note that pumps should always be ran in a well ventilated area.
| Electrical requirements
|| 115V 60Hz or 230V 50/60Hz single phase, 1100 watts
| Pumping rate
|| 21 cfm
| Ultimate vacuum without gas ballast
|| 0.3 micron/millitorr
Ultimate vacuum with gas ballast
| Inlet/outlet connection
|| KF25/NW25 flange
| Oil volume
|| 2 liter / 2.1 quart
|Motor rate||1715 rpm|
|Working temperature||5 to 40°C|
21x7.5x12" / 37x10x17"
| Unit/shipping weight
|| 80 Lb / 98 Lb
|Recommended oil||Ultra-grade 19|
|Noise level||< 58 dB|
||UL (E500328), CSA, CE|
Vestibulum fringilla pede sit amet augue. Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Integer tincidunt. Vestibulum turpis sem, aliquet eget, lobortis pellentesque, rutrum eu, nisl. Suspendisse potenti.Button
Phasellus viverra nulla ut metus varius laoreet. Etiam sollicitudin, ipsum eu pulvinar rutrum, tellus ipsum laoreet sapien, quis venenatis ante odio sit amet eros. Etiam imperdiet imperdiet orci.